FormFutura AthenaX 1.75mm | 1000g

Sale!

~~£33.92~~ £28.92

Colour

Quantity

Item number: 8720629067742

Key Features:

High impact strength comparable to Tough PLA
High dimensional accuracy
Good chemical resistance
HDT of 76°C / Vicat of 88°C
Water resistant polymer - hydrophobic

Application:

Electronic housings and components.
3D printing end-use parts
Small-scale production
Tooling and manufacturing aids
Packaging and containers

Description

AthenaX is a PCTG based filament, this filament 3D prints as easy as PETG with a superior clarity and impact resistance comparable to Tough PLA. AthenaX enables you to 3D print parts with high dimensional accuracy.

Specification

Diameter:	1.75mm
Weight	1000g

Recommendation

Temperature

Printing Tem: 250 – 290°C

Heat Bed Temp: 85 – 100° C

Drying

75°C / 24 hours

Fan Speed

0 – 100%

Surface

Adhesive

Closed Chamber

Recommended

Nozzle Diameter

≥ 0.4mm

Note

Pre-drying AthenaX

AthenaX is a PCTG based filament. PCTG is moderately hygroscopic and therefore it is recommended to predry the filament at 75°C for approximately 24 hours before usage for optimal results. You will get the most out of the material properties with pre-dried filaments. For optimal print results we recommend to print AthenaX filament from a drying box to avoid that the material can accumulate humidity from the environment.

Storage and handling

Filament should be stored at room temperature in a dry and dark place with humidity below 15%.
Recommended storage temperature is ca. 18-25°C (64.4 -77.0°F). Keep out of moisture, sunlight and direct
heat. When stored properly, product has a shelf life of 24 months. To obtain the best parameters of the
printed object, it is recommended to dry the material prior to usage and to 3D print it directly from a dry box.