DimaFix Spray 3D printing adhesive - 400ml

DimaFix Spray 3D printing adhesive - 400ml
£17.99
Item number: 8436556020018

Key Features:

  • It provides great grip between plastic and glass, so warping is not a problem even in large ABS parts.
  • Suitable for all types of thermoplastic materials 
  • Strong bond during printing
  • You will be able to print in all kind of  materials.
  • The adhesion property will be activated when the Heated Bed’s temperature is higher than 50ºC.
  • While the bed is hot the adhesive effect will be working even in large prints.
  • When the Heated Bed’s temperature goes down (40-50ºC) the adhesion effect disappears and the model will be easily detached.
  • It is soluble so it is easy to clean only with water.
  • It has a long useful life (more than 100 uses).

Application:

  • 3D Printing adhesive for all kind of thermoplastic materials.
DimaFix is a general purpose 3D printing adhesive that ensures a strong bond between the first layer and the build plate when the bed is heated above 60° C.
The first layers in the printing process will be fixed with Dimafix at the hot Heated Bed in the point where the part will be printing. This action avoids unintended effects or warping. Once the printing process is ending and the Heated Bed’s temperature is under 50ºC the model can be removed without any effort from the bed and no tools, that would damage the part, are required.

INSTRUCTIONS

How to use the DimaFix

1. Shake the Dimafix well before use

2. Check if print bed temperature is below 50ºC and apply Dimafix on your print bed

3. Wait a few seconds for the print surface to dray and heat your print bed

4. Keep the print bed temperature above 85ºC during printing

5. After printing, wait for the print bed to cool down and remove your printed object from the print bed while it detach itself

RECOMMEND

Different print bed temperature results in different levels of adhesion:

Below 60ºC: Low adhesion, the objects can be detached from the plate.

60 – 75ºC: Average adhesion, for simple geometries.

75 – 95ºC: High adhesion, for complex geometries and lengthy prints.

Above 95ºC: Very high adhesion, for very complex geometries and very lengthy prints.

SAFETY

Please always Read MSDS and the label on the product that you have received.We cannot accept responsibility for any safety related.

Documents

TECHINICAL DATA SHEET
PDF – 1.0 MB 105 downloads
MATERIAL SAFETY DATA SHEET
PDF – 3.7 MB 107 downloads

Manufacturer

  • DimaFix

RELATED PRODUCTS

Customer Reviews

Rating: 0 stars
0 votes