3DLac Adhesive Spray - 400ml

Sale!

~~£13.99~~ £8.99

Content

Quantity

Item number: 8411322235803

Key Features:

Ultra fast drying.
Excellent adhesion.
Great durability (more than 400 uses)
Ease of application.
Water cleaning.
Good antiwarping behavior ABS, PLA, PETG...
Adhesion on any surface.
Intelligent Fixation Properties.
Product recognized by the Spanish Toxicological Institute

Application:

PLA, ABS, PETG and more materials

Description

Its function is to hold the first plastic coat in order to hold the start of the printing steady, avoiding undesirable mistakes. 3DLAC is the perfect substitute for Kapton tape and other types of fixers due to cost-saving and its easy application. A light 3DLAC mist over the surface is enough to hold completely the first layer of plastic to the base. Thanks to the properties of 3DLAC, while the base is hot the extruded plastic is firmly stuck. Once the printed piece gets cold, it can be taken off smoothly and without damages.

Recommendation

INSTRUCTIONS

Shake the aerosol very well before use, for approximately one Apply on clean and dry surfaces. Recommended for glass, mirrors, aluminum and any smooth surface.
On plastic surfaces, we recommend test first, the behavior of the product.
Apply a thin layer for best results.
Invert the aerosol to purge the valve after use, if the diffuser becomes clogged apply a little alcohol to your mouthpiece with a cotton swab
Always use in ventilated areas
Avoid applying to electronic devices.
Once used, clean the diffuser to keep it in good condition and thus avoid
Avoid use by minors

RECOMMEND

3DLAC can be applied on a multitude of materials, on which you want print with 3D printers. Depending on the materials will be obtained different adhesions, so we advise before printing large parts with certain technical materials are pre-tested.
A greater quantity of Spray does help to make the fastenings stronger.
When removing the parts, be especially careful as you do it, we recommend let the surface cool and if necessary give the piece a light touch so that it release easily

SAFETY

Please always Read MSDS and the label on the product that you have received.We cannot accept responsibility for any safety related.

Hazard statements

- H225 - Highly flammable liquid and vapour.
- H319 - Causes serious eye irritation.
- H336 - May cause drowsiness or dizziness.

Safety Recommendations

P101 - If medical advice is needed, have product container or label at hand.
P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P280 - Wear protective gloves/protective clothing/eye protection/face protection.
P304 + P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 - Dispose of contents/container in accordance with local/regional/national/international regulations.