Engineering LCD Resin – Ultimate 2TW

Engineering LCD Resin – Ultimate 2TW
£64.99
Item number: 8720629062365

Key Features:

  • High toughness and temperature resistance.
  • Modulus similar to Polypropylene (PP).
  • Excellent UV and weathering stability specs.
  • Memory shape capabilities.
  • Low skin irritation characteristics.
  • Good compatibility with all SLA, DLP and LCD / MSLA 3D printers in the range of 385 – 420nm.

Application:

  • 3D printing functional end-use parts.
  • Short-run manufacturing.
  • 3D printing outdoor parts.
  • Manufacturing custom braces and splints. 
FormFutura Engineering LCD Resin – Ultimate 2TW is a very versatile 3D printing resin. This resin is tough and temperature resistant. Next to this, it exhibits excellent UV and weathering stability. Ultimate 2TW is an impact resistant material with a modulus comparable to PP. It has memory shape capabilities and bends back when heated over 70C. A perfect match for many end-use part applications.

Print Settings

Anycubic Photon Mono SE

50µm
First / Burn-in Layers:6x to 8x 50 to 55 Seconds
Normal Layers: 3.5 to 4.5 Seconds
Lifting Distance: 6mm
Bottom Lift Distance: 8mm
Light-off Delay: 0.5 to 1 Second(s)
Bottom Light-off Delay: 1 to 1.5 Second(s)

Phrozen Sonic Mini 4k

50µm
First / Burn-in Layers:4x to 6x 45 to 55 Seconds
Normal Layers: 7 to 8 Seconds

*If you need the best settings for your 3d printer we highly recommend using the included RERF (Resin Exposure Range Finder) or Resin Exposure Calibration Tool.
This is most likely included with the 3d printer usb stick and or manual.

Preparation
  • Shake the bottle for at least 2 minutes before each use.
  • After shaking the bottle, leave the resin to rest for 10 minutes to let air bubbles get out of the resin
  • The resin can be poured back from the vat into the bottle once your print is finished
  • Always use protective measurements like safety glasses and nitrile gloves when handling resins.

Post-processing
  • We do advise you to post-process your 3D print in order to achieve the material properties
  • Rinse your 3D printed object in IPA or (Bio)Ethanol for approximately 5 minutes
  • An ultrasonic cleaner is preferred/recommended
  • Make sure that IPA and/or (Bio)Ethanol rinsed objects are perfectly dry before further post-curing
  • Place the rinsed parts in a well-ventilated area for at least 30 minutes, or use pressurized air for at least 2 minutes
  • Cure your object in a high power curing chamber for approximately 20-30 minutes at 65° C
  • The preferred curing wavelength is between 300-410nm

Safety

Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.

  • Always wear Respiratory Protection when sanding/cutting the resin object.
  • Always use nitrile gloves when handling resins and uncured resin objects.
Property Typical value Test Method
Young‘s modulus (Pull) 1700 MPa ISO 527
Elongation at break 90% ISO 527
Tensile strength 51 MPa ISO 527
Glass transition temperature (Tg) 109 °C 109 °C
Shore hardness 80A
Density ρ 1,18 g/cm3
Shore Hardness 71D

Specimen printed in ZXY Orientation (ISO 52921) and examined according to ISO 17296-3.

 

Please note that the above-displayed values can vary with individual machine processing, post-curing parts,  geometry, print orientation, print settings, and temperature.

 

Specimens are printed on an Elegoo Mars 2 Pro at 23°C and 50% humidity with a 0,05mm layer height and 5 seconds exposure time per layer.

Specimens have been post-cured for 30 minutes with 200W and 405nm UV LED conditioned for 72 hours at 23°C and 50% humidity.

 

Documents

TECHNICAL DATA SHEET
PDF – 120.7 KB 199 downloads
SAFETY DATA SHEET
PDF – 192.7 KB 202 downloads

Manufacturer

  • FormFutura

Customer Reviews

Rating: 0 stars
0 votes