HIPS can be used as basic material for printing or as a support for other types of ﬁlaments. Accuracy and lighter weight of printing enable to use it in modeling, creating miniatures and parts of costumes. The possibility of dissolving of this ﬁlament allows it to be used as support material for highly complex printing and subsequent rinsing it out from proper printing.

Using it in printing will give you a light and good-looking print with a matt surface. You can polish it and even coat it with acrylic paint. This allows each model or miniature to look very tasteful.

You can also decide to use it as a supporting material for prints that have large overhangs or non-standard shapes. You just need to immerse the print in D-limonene after this. It will dissolve the HIPS, leaving only the proper print.

Specification

Diameter	1.75mm
Diameter Tolerance	± 0.02mm
Oval Tolerance	+ 0.01mm
Net weight	850grams
Mechanical Properties Test Method	ISO178, ISO180, ISO527, ISO1183

Recommendation

Nozzle Temperature	230-240°C
Bed Temperature	80-100°C
Printing Speed	35 60 mm/s
Fan	0 - 10%
Closed chamber	not required
Surface	glass, masking tape

Manufacturer

Fiberlogoy

TECHNICAL DATA SHEET

PDF – 280.8 KB 81 downloads

Download

SAFETY DATA SHEET

PDF – 993.4 KB 79 downloads

Download

Fourth dimension of printing

Your prints are sure to become something to show off among other 3D printing enthusiasts. After all, not everyone is able to achieve such printing precision.